Flat Seam Roofing | Solutions in Milwaukee county

Get premium-quality flat seam roofing solutions in WI. Get the best products, expert advice, and warranties for our roofs today!

Why Choose Flat Seam Roofing in Milwaukee ?

1. Superior Water Shedding

Rain can freeze overnight in Milwaukee . Overlapping panels or membranes are not fully soldered at joints, in contrast to flat seam roofing. It eliminates the capillary gaps by creating a monolithic barrier like a single sheet. It sheds the water cleanly and keeps your Milwaukee home protected.

Milwaukee is famous for dramatic freeze-thaw cycles. It causes roofing materials to expand and contract repeatedly, leading to cracks, lifts, or developing weak seams for shingles or single-ply membranes. Flat seam metal roofs remain stable when installed over a rigid substrate. Panels are soldered, fastened, and interlocked to reduce the expansion and avoid panel stress or warping.

Flat seam roofing allows custom geometric shapes for your roof – let it be a turret, bay window, vertical wall cladding, or an integrated parapet. Our crews can easily bend and solder to create a weatherproof skin for any shape.

Flat seam roofing made from metals like copper or Galvalume can last 50+ years, unlike organic materials like asphalt or rubber. The metals have oxide layers to resist UV, salt, snow, and acid rain. It saves building owners a lot of money in replacement costs.

You can easily fabricate flat seam metal with cool roof coating like Kynar to reflect solar radiation. It will keep your attic or upper floor cooler in the summer. The tight seal and metal conductivity will retain heat during winter, saving up to 10-25% energy annually. 

There are no seams to peel, no adhesive to fail, and no granules to erode in flat seam systems. This keeps the maintenance cost very low. Light cleaning and a visual yearly inspection are good enough. You can even repair the weak solder joint by reheating.

Roof Instalation Milwaukee - Northern generation roof types

High-Quality Materials to Ensure Your Safety

We always use tested materials. Our flat-seam metal roofs are mostly installed with these materials.

  • Copper: Suitable for restoration work.
  • Galvanized Steel or Galvalume: Inexpensive and corrosion-resistant.
  • Stainless Steel: Suitable for commercial areas, especially for chemically exposed rooftops.
  • Pre-Finished Aluminum: Rust-free and lightweight with factory color finishes.

Our Flat Seam Roofing Process

Step 1
  • Call us now and schedule your free on-site roof inspection.
  • Our team will visit your site for a roof assessment and measurement.
  • We will provide you with a free quote so that you can set the budget before the work begins.
  • Our dedicated team will prepare the site.
  • The work will begin.
  • Our craftsmen will lay out the panel, secure it with clips, and solder or seal the flat seam.
  • Final inspection, edge detailing, and flashing will be done.

To Whom Flat Seam Roofing is Suitable

Flat Seam vs. Standing Seam: Know the Difference

Feature Flat Seam Standing Seam
Roof Slope Very low to flat 1/4:12
Panel Size Small, soldered Large, snapped
Best For Detailed work, historic buildings Large surface areas
Installation Labor-intensive, custom Faster, modular

Not sure which one to pick? Call us now

© 2025 All Rights Reserved | Northern Generations Construction

Request Estimate

This will close in 0 seconds